Certified Asphalt Crack Repair Service in Celina, Texas

Hot-pour crack filling involves heating the filler material to around 300°F before application into asphalt cracks. While the filler usually dries within 30 minutes to an hour, complete curing may extend to two to three days. During this curing phase, there is an increased risk of filler displacement or damage. We will provide guidance on traffic restrictions based on vehicle types and repair locations. Typically, pedestrian traffic can resume after about an hour, but heavy trucks may need a longer delay. Repairs near pavement edges or in low-traffic zones can be conveniently isolated.

Step 1: Get the Surface Ready - We begin by using a brush, broom, or compressed air to thoroughly clean the cracks, removing any debris to ensure optimal adhesion.

Step 2: Apply the Crack Filling Material - Next, we apply hot pour crack filler to the cracks. This material is heated to a high temperature to guarantee smooth flow and strong adhesion to the crack walls.

Step 3: Finish & Cure - After applying the filler, we use a squeegee to smooth it out, making sure it blends seamlessly with the pavement. Then, we let it cure to solidify and create a strong, long-lasting seal.